Chemical Weighing Filling Machine Liquid Filling Scale

The weighing type liquid quantitative filling machine adopts high-precision electronic weighing technology combined with automatic filling technology, achieving high-precision dynamic metering and filling of liquid media. The metering data is intuitive, and its accuracy is not affected by factors such as pressure, temperature, bubbles, or impurities. It is easy to install and debug, simple to use and maintain, and can be widely used in the quantitative filling of liquids in industries such as edible oil, lubricating oil, alcoholic beverages, drinks, coatings, paints, and chemicals.

According to the weighing range, it can be divided into small packaging filling machines (below 5Kg), medium packaging filling machines (10-50Kg), and large packaging filling machines (above 100Kg).

According to the number of filling nozzles, it can be divided into single-head, double-head, and multi-head.

If used in flammable or explosive environments, explosion-proof measures should be taken.

The weighing type quantitative filling machine consists of a weighing sensor, scale body, rollers, weighing controller, electrical control part, pneumatic control part, filling nozzles, and related pipelines. It has simpler pipelines compared to flow meter type filling machines. To ensure system stability and accurate weighing data, the motor pump is generally external but can also be internal depending on the situation.

【Product Features】

(1) Fast and slow dual-speed automatic quantitative filling----Greatly improves filling accuracy and production capacity;
(2) Gross weight and net weight can be selected arbitrarily----Meets various user requirements;

(3) Can achieve above-liquid filling and below-liquid filling----Wide adaptability to materials;
(4) Design of pneumatic bottom valve and liquid receiving cup----Minimizes residual liquid dripping after filling;
(5) Automatic and manual modes for quantitative filling can be selected----Facilitates operation and maintenance;
(6) Automatic tare function----Overcomes the impact of inconsistent container weights on accuracy;
(7) Adjustable set point----Adapts to quantitative filling of various weight ranges;
(8) Automatic diagnosis and fault alarm----Improves system reliability;
(9) Safety check----The filling gun can only lower when the barrel is in place;
(10) Self-locking control----Before filling, it checks that the filling gun is in place before allowing filling;
(11) Automatic advance correction----Automatically corrects the advance value after each weighing to ensure filling accuracy;
(12) Tolerance detection----Automatically detects the error of full filling;
(13) Filling gun lifting speed control----Allows users to control the lifting speed of the spray gun to adapt to products of different viscosities;

(14) Allows materials to contain bubbles, impurities, etc.

【Technical Specifications】(**For reference only, specific values depend on actual conditions**)

(1) Maximum weighing capacity:1200kg
(2) Minimum sensitivity:0.1kg
(3) Filling error: ±0.1-0.2kg
(4) Filling speed: Approximately 40-50 barrels/hour for 200L, approximately 8-12 barrels/hour for IBC (depending on feed flow rate)
(5) Control method: 2-speed control
(6) Filling method: Insertion type, below liquid level
(7) Nozzle pipeline: SUS304 stainless steel and Teflon (optional SUS316L)
(8) Structure material: Carbon steel with paint finish (optional stainless steel)
(9) Scale platform size: 1300×1300mm (can be equipped with roller conveyors, optional accessories)
(10) Empty barrel conveyor: 1500mm×1300mm (optional)
(11) Full barrel conveyor: 1500mm×1300mm (optional)
(12) Roller material: Carbon steel galvanized (optional 304 stainless steel)
(13) Pipeline pressure: 0.2-0.6MPa (depends on material properties)
(14) Material interface: DN40 quick-install clamp (water nozzle), can be customized according to user interface standards
(15) Air source interface: User provides 8mm air hose connector for quick coupling connection
(16) Power supply: AC220/50Hz (user provides to the machine side)
(17) Air source: 0.4-0.8Mpa (user provides to the machine side)
(18) Operating temperature: -10℃ to 50℃
(19) Foundation requirements: Level and sturdy concrete floor with a thickness greater than 10cm.

(20) Machine dimensions: 190*190*130 CM